Structural ReinforcementCARBON RODS

WITH BEST GRIP SURFACE

Carbon fiber rods with high grip surface

This type of pultruded profile is also widely used in Structural Reinforcement thanks to the very high performance ensured on very narrow sections.

DESCRIPTION
TECHNICAL FEATURES

Standard diameters 6 – 8 – 10 – 12 mm are available from stock, with Elastic Module 150 GPa. On request we can manufacture Rods with custom Diameter and Elastic Module according to the customer’s specifications.

Technical features of carbon rods :

Very high tensile strength
Elastic modulus between 140 GPa and 280 GPa
Excellent lightness rigidity ratio
Compression strength (> 600 N/mmq)
Very high adhesion
Dimensional stability
Resistance to chemical corrosion
Resistance to saline environments
Absorption of vibrations
Radiotransparency
High electrical conductivity
Standard lengths 3 – 6 m
Custom lengths, up to 12 m.

This profile finds an optimal use in the reinforcement of beams, walls, facades or columns within a natural quarry (joint) or within a quarry obtained by milling; maximum adhesion through adhesives or mortars is achieved by using the rod with best grip (improved adherence) surfaces, but there are no particular restrictions if the smooth surface rod is used.

APPLICATION

Carbon rod with high grip

Concrete mix reinforcement • Horizontal or oblique reinforcements for beams, concrete beds, roofs, domes • Cantilevered reinforcements for terraces or similar • Vertical reinforcements for plinths and columns, retaining walls • Excellent for the stiffening of structures in wood or metal • Excellent in general restructuring